1. All 3M Products

3M™ Fastbond™ Contact Adhesive 30NF

Products
  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
  • Adhesive can be applied by spray, brush or roller
  • Non-flammable in its wet state
 More
Product Color
Product_Color
Products Available
 Product Color
All Models
Close
Details

3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based, adhesive designed to have high strength, high coverage, long bonding range and good heat resistance. This classic adhesive has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer and canvas.

We designed 3M™ Fastbond™ Contact Adhesive 30NF to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern.





Water Based Adhesives can be applied by rolling or brushing


Recommended Applications

Most formed plastics
Plastic laminate
Wood
Plywood
Wood veneer
Canvas


High Immediate Strength, Long Bonding Range

Formulated to be a fast-acting solution, 3M™ Low Mist Contact Adhesive 30NF delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.



Applying Your Adhesive

Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
  • Adhesive can be applied by spray, brush or roller
  • Non-flammable in its wet state
  • Color changes from white to clear when dry
Specifications
Application Method
Brush, Roll, Spray
Brand
Fastbond™
Container Size
1 Gallon, 1 Quart, 270 Gallon, 5 gallon, 55 Gallon
Environmental Considerations
California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
Flame Retardant
Non-flammable
Heat Resistance
<230 Degree Fahrenheit
Industries
Construction, Furniture, General Industrial, Military and Government, MRO, Specialty Vehicle, Transportation, Woodworking
Open Time
30 minutes to 4 hours
Physical Form
Thin liquid
Product Color
Green, Neutral
Product Form
Bulk
Solids Weight Percent (Approximate)
42.4 to 50 Percent, 47 to 51 Percent
Volume (Imperial)
1 gal, 1 qt, 270 gal, 5 gal, 52 gal
Follow Us
The brands listed above are trademarks of 3M.
Change Location
India - English