3M™ PPA Application Engineers want to hear about what you’re working on. If you’ve got challenges related to processing extruded materials, we want to help. For information, advice and collaboration, contact a 3M Technical Specialist.
3M™ Dynamar™ Polymer Processing Additives have helped manufacturers improve both quality and output for a variety of extruded products – from the plastic bottles and bags in your cupboard to construction materials like pipe, cable and even artificial grass. Dynamar PPAs are effective at low use levels (100–1000 ppm), so just a small amount can reduce common processing issues like die build-up and melt fracture. That results in better surface quality, less waste, increased productivity, and a smoother extrusion process from start to finish.
Dynamar PPAs have been widely used in blown and cast film processes, pipe and sheet extrusion, cable, fiber and monofilament extrusion, blow molding and compounding. They work by creating a low surface energy coating on the die surface. This allows the melt to slip through the die more freely and more easily, without sticking.
See some of the many ways you could benefit from the use of Dynamar PPAs:
Proper PPA selection can make all the difference, but it is not always easy. A difference in only a few hundred parts per million (ppm) usage level can have a big impact on your operations. By entering a few quick details about your application, we can help you narrow the choices to products that are likely to be most suitable for your application. Then connect with a 3M technical expert to discuss your needs and make sure you are set up for success the first time.