3M™ Bristle Brush Flange
- 3M ID B40068105
Details
Highlights
- Two-piece flange holds a minimum of 7 bristle discs
- 25.4 mm (1in) hole optimizes mounting of 152.4 mm (6in) bristle discs on bench motors with a 25.4 mm (1in) diameter shaft
- 3M™ Telescoping Wheel Flange Adapter (Part No. 5, sold separately) can be inserted in the center hole to adapt to shaft sizes as small as 12.7 mm (1/2in) diameter
- Can be used with one or more 3M™ Spindle Extender Adapters (Part No. 30134, sold separately) when additional layers of bristle discs are required
3M™ Bristle Brush Flange holds together a minimum of seven 152.4 mm (6in) radial bristle discs for use on bench motors with a shaft size of 25.4 mm (1in)diameter.
For bench motors with shafts smaller than 25.4mm (1in), a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 12.7 mm (1/2in), 15.875 mm (5/8in), 19.05 mm (3/4in) or 22.23 mm (7/8in) shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
Typical Properties
