1. India
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and 5516A Series

3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and 5516A Series

34  Products
  • Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
  • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
  • Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
  • Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
 More
View all details
Product Colour
Product_Color
34 Products Available
 Product Colour
All Models
Showing 24 of 34
Close
Details

The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminium conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).

The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminium (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

  • Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
  • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
  • Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
  • Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
  • Rated for 15 kV class cables
  • Factory-tested partial discharge and AC ensure reliability
Specifications
Applications
Cable Connection
Brand
3M™
Conductor Material
Aluminum, Copper
Conductor Sizes
1 AWG, 1/0 AWG, 1000 kcmil, 2 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 350 kcmil, 4/0 AWG, 500 kcmil, 750 kcmil
Insulation Level
1.33, 100%, 133%
Number of Conductors
1
Product Colour
Black
Product Series
5610A
Shielding Type
Concentric Neutral (CN), Longitudinally Corrugated (LC), Tape Shield, UniShield®, Wire Shield
Splice Type
Cold Shrink
Voltage
15 kV