3M™ QS-II Molded Rubber Splice 5501, Tape Shield, Wire Shield, UniShield®, 15 kV, 4-1/0 AWG (Cu) stranded, 2/0 AWG (Al) stranded, 2-1/0 AWG solid, Cable Insul. O.D. 0.637-.0.900 in (16,2-22,9 mm), 1 per case
- 3M ID 80610123384
Details
Highlights
- Inline splice to use on tape shield, wire shield, or UniShield® cables
- Designed for direct burial installations, as well as indoor and outdoor applications
- Cable has 0.637 to 0.9-in insulation O.D
- Accommodates 4 to 1/0 AWG, 2/0 AWG stranded and 2 to 1/0 AWG solid copper or aluminum conductors
- Peroxide-cured EPDM rubber construction provides physical protection
- Rated for 15 kV cables
- Factory-tested to offer reliability
- Meets the requirements of IEEE 404 standards
3M™ 5500 Series Molded Rubber QS-II Splice Kit is an inline splice designed to use on 15kV tape shield, wire shield, and UniShield® cables with copper or aluminum conductors. Its peroxide-cured EPDM rubber construction ensures a long life. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate.
3M™ 5500 Series Molded Rubber QS-II Splice Kit includes 2 Cold Shrink™ end seals, 2 silicone grease tubes, 2 shielding tape 24 strips, a shield clamp, mastic sealing strip, shield continuity assembly, semi-con tape 13 roll, vinyl tape 35 roll, solvent-saturated cleaning pad, plastic glove and an instruction sheet. The kit meets the requirements of IEEE 404 standards.
Typical Properties
Resources
