3M™ Cold Shrink QS4 Integrated Splice QS4-35SP-QCI-350-750-BCA
- 3M ID 80611609068
Details
Highlights
- Inline splice for joining JCN, flat strap neutral, tape shield and LC cables
- Special-electrode design reduces electrical stress at critical cable and splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
- 1.24 to 2.07-in O.D. insulation
- Accommodates wire size of 350 to 750 kcmil
- Includes tape 24 roll, 2 tape 1181 strips and 2 tape 1115B strips
- Rated for 35 kV cables
- Withstands a temperature range of 221 to 284 degrees F (105 to 140 degrees C)
- IEEE Approved
3M™ QS4-35SP Series Cold Shrink Integrated Splice Kit with shearbolt connector, is a 35 kV-class inline splice to join JCN, flat strap neutral, tape shield and LC power cables. Cold shrink design fits type MV-90 or MV-105 cables with aluminum or copper conductors while ensuring easy installation. The silicone-rubber construction offers good high- and low-temperature performance.
With this splice, 3M is introducing our easy-to-use yellow core and rejacketing tube. We incorporated our smooth-edged shield sock (non-fraying ends) with optional customizable ground braid. The Shielded Power (SP) inline splice kits below are designed for joining Jacketed Concentric Neutral (JCN), Flat Strap Neutral, Tape Shield and Longitudinally Corrugated (LC) power cables. The splice includes a 4 AWG, four-foot long integrated ground braid for attaching to an external ground (factory installed ground braid extends approximately four feet beyond the end of the rejacketing afer installation). Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Typical Properties
Resources
Similar products
| Voltage | 35 kV | |||
| Number of Conductors | 1 | |||
| Splice Type | Cold Shrink |
3M™ Cold Shrink QS4 Integrated Splice QS4-35SP-QCI-350-750-BCA