3M™ Modular Splicing Kit 5815-B3, 600 Amp, 15 kV
- 3M ID 80610983225
Details
Highlights
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
This splice will fit directly into the main tee-module body of any 3M Modular Splicing Kit.
The cable adapter kit includes 1 cable adapter, 1 aluminum compression connector, 1 cold shrink jacketing tube, 1 constant force spring, 1 ground braid assembly, 2 mastic sealing strips, 2 silicone lubricants, 1 CC-3 cable cleaning pad kit and 1 product information sheet. One kit required for each cable being spliced.
Typical Properties
Similar products
Current product  3M™ Modular Splicing Kit 5815-B3, 600 Amp, 15 kV | |||
|---|---|---|---|
| Voltage | 15 kV | ||
| Maximum Voltage | 15 kV | ||
| Insulation Diameter Range (metric) | 23.1-27.1 mm | ||
| Minimum Insulation Outer Diameter (Metric) | 16.3 mm | ||
| Maximum Insulation Outside Diameter (metric) | 19 mm | ||
| Cable Voltage Rating | 15 kV |
3M™ Equipment Connection Splicing Kit 5815-E, 1 per case
3M™ Modular Tap Splice Kit 5815-T, 1 per case