Go to IN Navigation
Go to CORP_SNAPS_GPH Navigation
Go to Page Content
Go to Search
Go to Contact Information
Go to Site Map

India
All 3M Products
Tools & Equipment

3M Tools & Equipmentfor OEM & Tier

120 products

Your selections:

Filter

Standard Abrasives™ Quick Change Disc Pad

Standard Abrasives™ Quick Change Disc Pad

Options available

Standard Abrasives Mandrels for Cartridge Roll Illustration

Standard Abrasives™ Cartridge Roll Mandrels

Options available

Standard Abrasives Holder Pads

Standard Abrasives™ Quick Change Holder Pad

Options available

3M(TM) Hookit(TM) Disc Pad, PN 05775

3M™ Hookit™ Disc Pad

Options available

3M™ Unitized Wheel Mandrel

3M™ Unitized Wheel Mandrel

Options available

3M™ Disc Pad Holder 915, 5 in x 1/8 in x 3/8 in 5/8-11, internal

3M™ Disc Pad Holder

Options available

3M(TM) PSA Disc Holder 45068, 60-9865-0677-6. Pressure sensitive. 5", 1/4" shank. Used with any electric or air grinding tool for 1/4" shank. Abrasives accessories. Ed M. Product tabletop shot.

3M™ PSA Disc Holder

Options available

Accessories photograph 3M(TM) Grit-Lok(TM) Disc Hub 51144-11823-6 4 1/2 inches 60-9800-1119-5

3M™ Disc Pad Hub

Options available

3M(TM) Stikit(TM) Soft Interface Disc Pad 02795, 5 in. x 1/2 in., 25 per inner 100 per case, 60-9801-0602-9, 00-051111-56459-2. Soft foam with loop material bond on both sides. One side attaches to a Hookit(TM) backup Pad and the other side is used to attach a Stikit(TM) abrasive disc. Keywords: Abrasives, Power Tools, Accessories, Compounds, Specialties, spare parts, repair parts, 3M™ Accessories for Abrasives Products Catalog, 61-5002-8098-9, Ed M., Conversions & Replacement Parts. 2009. Product tabletop shot.

3M™ Stikit™ Disc Pad

Options available

Scotch-Brite™ Hookit™ Conversion Face 28806, 3", 1 per bag, 5 per case. 60-4402-4186-1, 051141-28806-2, Black/White color, Attachment Type: Hookit™/Hook & Loop. Product front and back position tabletop shot.

Scotch-Brite™ Hookit™ Conversion Face

Options available

3M(TM) Disc Pad Face Plate Ribbed 28443, 4-1/2 in Extra Hard Red

3M™ Disc Pad Face Plate Ribbed

Options available

3M™ Stikit™ Low Profile Finishing Disc Pad

Options available

3M™ Stikit™ Low Profile Disc Pad

Options available

3M™ Center Pin Backup Pad, 7"x7/8"x5/8"-11 INT, 20245-7

3M™ Hook and Loop Disc Pad Holder

Options available

Roto Peen Mandrel 7211

3M™ Roto Peen Mandrel

Options available

3M(TM) Roloc(TM) plus Holder 07500

3M™ Roloc™+ Holder

Options available

3M™ Disc Sander 28408, 4-5 in. 5/8-11 EXT, 1 hp, Right Angle Up View, Black, 051141-28408-8, tif

3M™ Disc Sander

Options available

3M(TM) Hookit(TM) Roloc(TM) Disc Pad 28655, 1-1/4 in x 5/16 in. For use if a sanding tool is preferred over hand sanding. The Roloc(TM) sanding pad can be used with a 1 inch Roloc(TM) disc pad or with tools equipped with the Roloc(TM) attachment system. Use with 1-1/4 in Hookit(TM) discs.

3M™ Hookit™ Roloc™ Disc Pad

Options available

3M™ Hookit™ Low Profile Finishing Disc Pad

Options available

3M(TM) Square Cross Pad Mandrel 14307, 1/4 in 8-32 External, 1/Inr., 1 per case. 00051144143078. Used for holding Square Pads and Cross Pads with 1/4-20 internal threaded inserts. Mandrel has 1/4 inch diameter 1/4-20 external threaded shank. 3M(TM) Square/Cross Pad and Cross Buff Mandrel. Keywords: EnterpriseWeb, UPC Clipped, EX+. Product tabletop shot.

3M™ Square/Cross Pad Mandrel

Options available

Accessories photograph. 3M(TM) Doodlebug(TM) Pad Holder 250, 61-5000-4913-7, Part No. 250, Hand Pads/Blocks, Hook & Loop, use with 4 X 10 inch sheets. 4 X 9-1/4 inch. Product tabletop shot. 3M(TM) Accessories for Abrasive Products Catalog, 61-5002-8098-9.

3M™ Hook and Loop Pad Holder

Options available

3M(TM) Disc Pad Face Plate 13325, 4-1/2 in Medium Gray

3M™ Disc Pad Face Plate

Options available

3M™ Hookit™ Low Profile Disc Pad

Options available

3M™ Hookit™ Clean Sanding Hook Saver

3M™ Hookit™ Clean Sanding Hook Saver

Options available

3M(TM) Wheel Adapter Kit PN28419, 1/2-20 External

3M™ Wheel Adapter

Options available

Spindle Extender Kit 300. Part No. 300. 61-9888-3000-8. 048011-04019-6. Abrasives Accessories. Product tabletop shot. 3M(TM) Industrial Products-Abrasives and Power Tools for Welders Catalog, 61-5002-8284-5, 2011, Welding Solutions.

3M™ Spindle Extender Kit

Options available

3M(TM)File Belt Sander PN28366 and Standard Attachmt Arm PN28368

3M™ File Belt Sander

Options available

3M(TM) Roloc(TM) Gasket Removal Disc Pad Assembly 07715, 2 in, 5 per case, 00051131-07715-7. Roloc(TM) gasket removal disc pad holder.

3M™ Roloc™ Gasket Removal Disc Pad Assembly

Options available

3M(TM) Flexible Grinding Wheel Backup Pad

3M™ Flexible Grinding Wheel Back-up Pad

Options available

3M™ Clean Sanding Interface Disc Pad 28323, 5 in x 1/2 in x 3/4 in 31 Holes. 3M™ Clean Sanding Interface Disc Pad is constructed of 1/2" medium density foam with a 3M™ Clean Sanding hole pattern to add conformability to a 5" 3M™ Clean Sanding Hookit™ backup pad (sold separately). Use this pad for edge cutting to tip the disc and maintain closer contact with the edge while maximizing dust extraction., 60440236234

3M™ Interface Pad

Options available

3M™ Hookit™ Clean Sanding Disc Pad

Options available

Accessories photograph 3M(TM) Finesse-it(TM) Roloc(TM) Finishing Pad 51144-14736-6 (3 in) 60-9800-1107-0. 3M(TM) Accessories for Abrasive Products Catalog, 61-5002-8098-9.

3M™ Finesse-it™ Roloc™ Finishing Disc Pad

Options available

3M™ Finesse-it™ Roloc™ Sanding Pad is made with a foam backing that provides conformability during operation. The pad size is ideal for accessing small and hard-to-reach areas. It also provides the convenience of the 3M™ Roloc™ TR Quick Change Attachment System in combination with 3M™ Stikit™ sanding discs. This accessory may be used when a sanding tool is preferred over hand sanding.
60980107274

3M™ Finesse-it™ Roloc™ Sanding Pad

Options available

Roloc(TM) TS Mandrel. Part No. 85097. 60-9800-3136-7. 1/4 inch x 2 inch. Abrasives accessories. Product tabletop shot. 3M(TM) Accessories for Abrasive Products Catalog, 61-5002-8098-9.

3M™ Roloc™ TS & TSM Mandrel

3M Stock

B40068114

3M(TM) Mandrel 944, 13928, 1/4 x 1/4 In. -20 EXT

3M™ Star Mandrel

3M Stock

B40068115

3M(TM) Roloc(TM) Shank 45102, 1/4" Shank 1/4-20 EXT, 50 per case

3M™ Roloc™ Shank

3M Stock

B40068104

3M(TM) Mini Mandrel 935, 2-7/8 in x 1/4 in

3M™ Mini Mandrel

3M Stock

B40068096

3M™ Cartridge Roll Mandrel 88749, 1/8 in x 1 in x 6 mm. Screw type mandrel for securely driving cartridge rolls. Dimensions listed as pilot diameter, pilot length, and shaft diameter unless otherwise noted., 60980025427

3M™ Cartridge Roll Mandrel

3M Stock

B40068089

3M(TM) Stikit(TM) Soft Disc Pad 70449, 1-1/8 in x 1/8 in., 5 per inner 25 per case. 60-9801-0615-1, 00051111-56472-1. Replacement face for PN50199. Has VHB adhesive on a soft foam and vinyl face. Soft foam provide flexibility which reduces edge cuts if the operator tips the sanding pad. Use with 1-1/4 inch PSA discs. Keywords: Abrasives, Power Tools, Accessories, Compounds, Specialties, 3M(TM) Accessories for Abrasives Products Catalog, 61-5002-8098-9, Ed M., Conversions & Replacement Parts. 2010. Product tabletop shot.

3M™ Stikit™ Soft Disc Pad

3M Stock

B40066116

3M(TM) Brake Hub Cleaning Disc Holder, PN 07545 6 per case

3M™ Brake Hub Cleaning Disc Holder

3M Stock

B40066097

Accessories photograph. 3M(TM) Roloc(TM) PSA Disc Pad, Part No. 85287, 60-9800-2414-9, 2 inch, max. rpm 10,000, max. opm 10,000. Product tabletop shot. 3M(TM) Accessories for Abrasive Products Catalog, 61-5002-8098-9.

3M™ Roloc™ PSA Disc Pad

3M Stock

B40066064

Accessories photograph. 3M(TM) Center Water Feed Disc Hand Pads Replacement Sponges, 60-9800-1576-6, Part No. 82191, 7/8 inch. Product tabletop shot.

3M™ Center Water Feed Disc Hand Pad Replacement Sponge

3M Stock

B40066060

3M(TM) Disc Pad Holder 9145 Down MRO Image

3M™ Disc Pad Holder 922, 2 in x 1/4 in Shank, 10 per case

3M Stock

B40071718

3M(TM) Hookit(TM) Center Water Feed Disc Hand Pad 70147, 3"x7/8"

3M™ Hookit™ Center Water Feed Disc Hand Pad

3M Stock

B40066065

3M(TM) Stikit(TM) Pad 20432, 3 in x 4 in x 1/2 in. For use with 3 in x 4 in Stikit(TM) Abrasive Sheets or 3 in wide Stikit(TM) Sheet Rolls with adhesive contained on the backing., 60440128068

3M™ Stikit™ Sheet Pad 28660, 2-3/4 in x 7-3/4 in x 1/2 in Red Foam, 5 per case

3M Stock

B40066036

3M(TM) Stikit(TM) Roloc(TM) Disc Pad 02727, 1-1/4 in x 5/16 in

3M™ Stikit™ Roloc™ Disc Pad 02727, 1-1/4 in x 5/16 in, 10 per inner 20 per case

3M Stock

B40066025

02_op_center.tif

3M™ Bristle Brush Flange

3M Stock

B40068105

3M(TM) Wheel Mandrel 07491

3M™ Wheel Mandrel 938, 2 in x 1/4 in, 1 per case

3M Stock

B40068101

3M™ Bristle Disc Mandrel 27680, 3/32 in x 1/16 in

3M™ Bristle Disc Mandrel

3M Stock

B40068097

3M™ Tapered Spindle Mount Adaptor Part No. 30133. Accessory for 2 and 3 inch Scotch-Brite™ Radial Bristle Discs. Discs mount on this adapter and adapter fits on standard tapered spindle for bench motors. Part # 30133, 048011-30133-4 UPC, 50 Qty. per Case. Scotch-Brite(TM) Radial Bristle Product Accessories. 3M(TM) Accessories for Abrasive Products Catalog, 61-5002-8098-9. Product assembled and unassembled photo tabletop shot.

3M™ Tapered Spindle Mount Adapter, 50 per case

3M Stock

B40068090

3M(TM) Platen Pad Cover Scotchlite 06541, 10-1/2 in x 53 in, 1 per case. 60-9801-0664-9, 00051111-56599-5. 3M(TM) Scotchlite silver cloth with Pressure Sensitive Adhesive backing used to protect platen pads. Keywords: Abrasives, Power Tools, Accessories, Compounds, Specialties, 3M(TM) Accessories for Abrasives Products Catalog, 61-5002-8098-9, Ed M., Conversions & Replacement Parts. 2010. Product tabletop shot.

3M™ Platen Pad Cover - Silver Cloth 06541, 10-1/2 in x 53 in, 1 per case

3M Stock

B40066099